There are 2 types of Saunas in addition to a mix between the two, but it is good to clarify that only the traditional type, ie Finnish is the classic sauna while the second type, infrared, goes more properly called infrared cabin.

To choose between these models it is necessary to take the different aspects into consideration.
For steam lovers in the sauna and higher temperatures in terms of space, energy used and longer heating time, the Finnish sauna should certainly be preferred.
If you prefer lower temperatures and an immediate use without waiting times with the heat that really penetrates the body, choose the infrared cabin.
The mix between the two models, is normally referred to as a combined sauna and integrates, as it is understandable, both systems.

It must be said that both the cabins and the saunas are ideal for relaxation, the consequent reduction of stress, sweating and relief from some muscular pains and joints. Unlike infrared cabins, in the Finnish sauna you can increase the humidity of the environment by pouring water on the hot stones.

Temperatures
In an infrared cabin, the temperature reached ranges from 40 ° C to 60 ° C.
In a Finnish sauna, however, it varies between 60 ° and 90 ° C.

Despite this temperature difference, the infrared cabin is still effective as it is not built to heat the room but, through infrared rays, produces effects directly on the body and also, the more bearable temperature allows a longer use time of the cabin to every session.
The infrared energy produced, is close to the same wavelength of that which the body emits, often naturally, called "Campo Vitale" (from 7 to 14 microns). Infrared energy penetrates the skin deeply and warms up the muscles and joints. So they increase body temperature and transpiration.

In an infrared sauna, it is important for the emitters / heaters to remain on almost constantly, as when they are switched off, the sauna cools quickly.

A traditional sauna, however, is designed to be used only when the environment is already heated. In fact, the internal heating in the interior induces user sweating. If the sauna has been pre-heated properly, the walls and rocks emit vaguely infrared heat, combined with the heated air to create an enveloping warmth.
Moreover, in the traditional sauna, during use, by pouring water on the rocks, steam is generated which, by increasing the humidity of the sauna, produces benefits on the respiratory system that "frees" itself.

In both infrared and traditional saunas, aroma and chromo therapy instruments are also present.

Pre-heating times
These also differ in the two types of healthy.

The infrared cabin has an immediate heating, so much so that it can be used already when switched on. However it is advisable to wait a few minutes to find the environment a little warmer.

The traditional sauna instead requires a pre-heating time of about 30-40 minutes.
The usage time is normally 10-15 minutes although, for those using the infrared cabin, you can stay longer (up to about 30 - 35 minutes).

Contact us for any information or clarification before and after sales.

Contrary to what happens in the rest of Europe and the world, in Italy it is difficult to associate electric heating with savings. This is due to a subjection also psychological that has been created and consolidated over time against gas, methane or LPG.

Even today it is easy to see still deliver LPG cylinders in apartments of our condominiums despite several episodes of news have highlighted the enormous risk that these tanks involve, not only to direct users but also to nearby homes.
..but this is another story ...

With our electric heating products, you can get warmth, comfort, savings and safety without neglecting the aesthetic aspect.

The technological innovation that has affected and continues to affect this sector, has allowed over time to offer products that are increasingly performing and less energy-intensive. All in an increasingly compact and pleasing aesthetic. The savings therefore go hand in hand with the reduction of consumption, an objective that can certainly be improved with a correct product planning.

These electric radiators, in fact, allow you to produce heat and heat the rooms in a short space of time and it is therefore not necessary to keep them on for a long time even in times when we are not in the environments in which they are installed.

In addition to the PLANO, DEKO, STYLO ranges, which, by means of the ZEFIRO accessory, can be programmed to run on a weekly basis, the new KLIMA and SIRIO ranges are equipped with an even more sophisticated electronics that allows products to notice if there are any sudden temperature dispersion, that is, if, for example, a window has been opened (accidentally or not)! In this case these products, even if they are in the ignition period, automatically go into standby, preventing an unnecessary and wasteful waste of energy and heat ... as well as economic!

Simple and ecomonic installation. A socket is sufficient at the electric radiator and it is time to fix it with wall plugs.

High comfort due to the enveloping sensation of heat thanks to a homogeneous and constant diffusion.

Correct programming of the switching on and off, the innovative electronics that our electric radiators are equipped with, adequate regulation of the programmed temperature for each programming area, make, together, that there is also a saving in the bill.

For any questions or information, before and after sales, we are at your disposal.

Thanks to a pleasant and constant flow of fresh air, the evaporative coolers lower the room temperature through an internal fan and to the evaporation of water and ice contained in their tank.

This is possible thanks to a special filtering system that allows the fan, with its own movement, to trigger the evaporation process.

As shown in the figure, the hot air passes through an anti-dust filter with a purifying action and, subsequently, through an evaporative panel which, as said, triggers the process of evaporation of the water and / or ice contained in the internal cooling panels and generating, therefore, a fresh ventilation.

Unlike air conditioners and air conditioners, coolers do not require any refrigerant gas or chemical components and are therefore completely environmentally friendly.

The main advantages of coolers are: the significantly lower purchase cost, extremely lower electricity consumption (and therefore significant savings in the bill), being eco-friendly as non-polluting, easy to use and transport (are equipped with practical wheels) and no installation costs.

Aer Domus, Aer Pro and Omni are three models of Radialight coolers. Equipped with touch screen controls and LED display, they offer different power and mode options. Omni is an excellent solution for both summer and winter as it is a single product that implements different functions: cooler, dehumidifier, humidifier and convector.

We are at your disposal for any information, pre and post sales.

LED lamps spend up to 50% less on energy bills compared to energy saving ones and up to 90% less than traditional or halogen ones!

There is a lot of talk about LED and its advantages and today they are so widespread that they can also be bought in non-technological stores, such as neighborhood supermarkets. Unfortunately, as often happens, in this sector too all kinds of sellers were improvised, from the most diligent to the usual speculators who, in order to optimize their revenues, have spent in commercial slogans of all kinds, then discrediting the product accordingly. .

But does LED really save? And how much?

The advantages are different.
Saving in ordinary maintenance, thanks to the long life of the LEDs;
Saving in bills, thanks to the consumption / luminosity ratio produced;
Maximum immediate and non-gradual brightness as for FLC compact fluorescents.

The disadvantages are:
The purchase price of the lamp, which has fallen in recent times, is always higher than traditional lamps;
Not all traditional lamps find a LED product that is perfectly equivalent but sometimes a compromise has to be found.

The advice is to buy a LED lamp instead of a traditional one if you use it frequently and for long periods of time. If you have moved to the purchase from the search for savings, in fact, install an LED instead of a FLC in case of rare use (for example a closet), would not produce the desired effect. However, if instead you replace lamps in lighted environments for several hours a day, such as cooking, certainly the purchase made will help you save money.
To see, however, a significant drop in the bill, at least of the component relating to consumption for lighting, it will be necessary to replace all traditional or FLC lamps with LEDs.

Estimated electric consumption (also depend on the cost of electricity and the type of contract, between hourly, bioraria, etc. as well as, of course, the consumption of each lamp installed):

Given that the cost of electricity is approx 0.25 € / kwh, if we illuminate a room with a 18W FLC lamp for 1 year (24 hours a day = about 8640 hours), we will have an even consumption at approx 155.52 kWh and a cost of approx 38.88 €
With a 9W LED lamp, which produces a brightness similar to the 18W FLC, instead consumption will drop to approx 77.76 kWh and the cost to approx € 19.44

Extending what is the unitary advantage for N lamps of an apartment, the savings that the installation of LEDs will bring to your pockets is soon done.
Remember, however, that the electricity consumption of the bill, also takes into account other factors of consumption (example: home appliances).

We are available for any clarification or advice before and after purchase.

Good savings!