Pentair reverse osmosis membrane TLC 100 GPD
We use the SSL standard to ensure security during payment
Orders made on workdays, until 09:00 are shipped same day (if all goods are in stock)
Purchases can be returned within 14 days (as per terms and conditions of sale)
WARNING: PRODUCT IN STOCK. Log in to see price and availability or REQUEST A QUOTE
Pentair TLC membranes for residential use
The best way to evaluate the overall filtration quality of a reverse osmosis system is to measure the rejection, i.e. the percentage of dissolved solids removed from the incoming water. In other words, the greater the rejection, the more performing the membrane. The recovery of a reverse osmosis system represents the quantity of permeate produced compared to the quantity of concentrate eliminated through the drain. The higher the recovery, the lower the rejection.
Structure of the reverse osmosis membrane
The spiral wound membrane element consists of one or more membrane envelopes wrapped around a perforated central tube. The purified water passes through the membrane and is, therefore, conveyed into the permeate collection material, while all the impurities captured through the rejection remain in the spacer of the supply channel.
The Pentair TLC Range
The TLC ™ (Thin Layer Composite) range is made up of three different sizes, 50 GPD, 75 GPD and 100 GPD, which allow to satisfy every type of requirement. The dimensions of these membranes are standard and they can be installed in any reverse osmosis system available on the market.
- Membrane in TLC (Thin Layer Composite)
- 100% dry membrane to maximize shelf life.
- High rejection stability at high TDS levels
- Standard dimensions: can be installed in any reverse osmosis system.
- Maximum pressure: 6.90 bar
- Maximum temperature: 49 ° C
- pH: 4-11 - Hardness: 17 ° F
- Free chlorine: 0.1 ppm
- Rejection *: 98%
Nominal performance TLC-100 • Flow rate * Gpd (l / day): 100 (378.5) * Nominal performances are based on softened tap water at 550 ppm, 4.5 bar, 25 ° C, with 15% recovery after 24 hours. The flow of the individual elements can vary by ± 15%.
The advantages of TLC ™ membranes
Pentair TLC membranes are 100% dry for maximum storage. Each reverse osmosis membrane is individually packaged, dry, in a plastic bag. No chemical preservatives are added, avoiding the risk of bacterial contamination, which can occur when the preservative runs out.
High rejection stability with inlet of total dissolved solids (TDS)
Whatever the amount of total solids dissolved in the incoming water, the TLC ™ membranes always guarantee optimal performance. Rejection remains stable between 96% and 98% even at 1000 ppm.
Pentair TLC membranes are tested and certified by NSF International according to NSF / ANSI Standard 58, which guarantees savings in time and money during the NSF certification process of the complete reverse osmosis system by the OEM.
The TLC-100 is tested and certified by NSF International to NSF / ANSI Standard 58, for material requirements only. TLC-24, TLC-36, TLC-50 and TLC-75 are tested and certified by NSF / ANSI according to Standard 58 for the reduction of arsenic, barium, cadmium, chromium (hexavalent), chromium (trivalent), copper, turbidity, fluoride, lead, radium 226/228, selenium or TDS.
Filters and membrane elements should not be installed on microbiologically unsafe water supplies. TLC membranes are not certified for the disinfection of water and the removal of cysts, bacteria or viruses. The performance of the filter and the membrane element can be affected by fluctuations in water quality.
Compatible with this vessel.
Note: Being a food grade product, it will arrive sealed in a clear vacuum bag. It is possible to check the dimensions of the connections without having to unpack the filter. If you have purchased the membrane with the wrong measurements, it is essential not to tear the bag. Otherwise we will NOT be able to proceed with the replacement or return. Any shipping costs for the return of the product purchased by mistake will still be at your expense.
By purchasing together 1 Terminter Filter and 2 CSM or PENTAIR Membranes, we will give you free shipping (all over Italy)!
1 Terminter filter (according to your purifier, choice between: OUT 10mm 3/8 '' 0858 or OUT 12mm 1/4 '' 1424 or Model BIG 1563)
with 2 CSM Membranes (100 GPD 1610) or 2 from PENTAIR (100 GPD 3028) or with 1 Integrated Vessel Membrane from Terminter (3033)
* Promotion not combinable with other offers *
No customer reviews for the moment.