Thermo Radiant Panels

Thermo Radiant Panels

The new range of radiant panels for industrial heating.

Ideal solution for heating rooms:
✔️ Industrial: warehouses, warehouses
✔️ Commercial: offices, shops, sales points and exhibition pavilions
Ivi Sportsmen: gyms, multipurpose centers

They can be used for heating a whole room or to create work islands in specific areas.



THERMO panels exploit the advantages of a particular innovative technology: silver-plated aluminum heating elements that are simultaneously the heat source and the radiating surface in direct contact with the air. This allows obtaining an exceptional thermal yield in relation to the absorbed power, eliminating the disadvantages of alternative heating systems used up to now in similar applications, such as for example unit heaters and infrared incandescent lamps.

The THERMO solution (long wave infrared)
THERMO panels radiate heat directly on the area to be heated with a very large emission surface.

Advantages:
✔️ Maximum energy efficiency because you avoid heating in areas near the ceiling
✔️ The body perceives a remarkable sensation of comfort at a contained air temperature
✔️ The heat is distributed very homogeneously, without too hot or too cold areas
✔️ No noise or drafts
✔️ Installation costs are very low: no additional control equipment is required (electrical panels, high to low voltage transformers)
✔️ The heating system realized is perfectly modular: the THERMO panels can be installed all together, or, in the case of subsequent expansions, you can decide to install the number of panels that best suits your needs.

The flexibility offered by THERMO radiant panel systems
The THERMO panels can be connected to the electricity grid either 230V single-phase or 400V three-phase, a choice that can be made directly by the installer in agreement with the end user.

Following this second option, the products can be connected to the electricity grid by creating independent circuits for each of the 2 (series 39) or 3 (series 55) heating elements present. Thanks to this expedient it will be possible to reduce the power absorbed in the less cold periods using only a part of the heating system realized. Thanks to the particular level of protection against humidity, THERMO products can be installed on a ceiling that protects them from rain, even outdoors (in this regard, follow the rules for the installation of electrical products in special places provided by the Standard CEI 64-8 / 7).

Data
Three THERMO panel models available:

✔️ HT22


Power consumption: 1750 W
Current: 7.7 A
Temperature: 300 ° C
Recommended installation height: between a minimum of 2.4 meters and a maximum of 2.7 meters
Supply conductor section: 1.0 mm2
Degree of humidity protection: IP54
Degree of electrical insulation: Class 1
Dimensions in cm: 167.5 (length) x 22 (width) x 7.5 (height)
Color: Aluminum
Net weight: 8.0 Kg

Tip: Suitable for narrow and long environments (e.g. corridors and passageways) or for areas delimited by partitions, the HT22 heating strips have a power of 1750 W. They must be installed 2.5 - 2.7 meters above the ground, at depending on the level of insulation and the geographical area, and cover an area of about 5 m2, which is why they must always be installed in series.


✔️ HT39


Power consumption: 3500 W
Current: 16.0 A
Temperature: 300 ° C
Recommended installation height: between a minimum of 2.7 meters and a maximum of 3.5 meters
Supply conductor section: 1.5 mm2
Degree of humidity protection: IP54
Degree of electrical insulation: Class 1
Dimensions in cm: 167.5 (length) x 40 (width) x 7.5 (height)
Color: Aluminum
Net weight: 12.2 Kg
Tip: Unlike the HT22, these heating panels are also suitable for single and non-delimited workstations. With a power of 3500 W (2 resistances of 1750 W), the THERMO HT39 must be installed between 2.7 and 3.5 meters from the ground, always depending on the environmental context. They are able to cover an area of about 12/13 m2 and, if installed in series, they produce a pleasantly homogeneous heat, intensified at the intersections with the radiant effect produced by the surrounding heating panels.


✔️ HT55


Power consumption: 5250 W
Current: 24.0 A
Temperature: 300 ° C
Recommended installation height: between a minimum of 3.2 meters and a maximum of 4 meters
Supply conductor section: 2.5 mm2
Degree of humidity protection: IP54
Degree of electrical insulation: Class 1
Dimensions in cm: 167.5 (length) x 57 (width) x 7.5 (height)
Color: Aluminum
Net weight: 16.6 Kg

Tip: The HT55 are the flagship of the THERMO range. With a power of 5250 W (3 resistances of 1750 W individually ignited), these powerful radiant panels require an installation between 3.2 and 4 meters from the ground and are able to heat larger areas, reaching an area of 16/17 m2. In case of series installation, therefore, the heating power reaches high levels in the intersection areas, avoiding thermal bridges in the passage areas.
Made in Italy

Discover the range and our offer